Keyless entry

Today our the remote to the Sienna arrived with the following instructions on how to program it (I think somewhere in here, we should add "turn yourself about"):

• Driver's door open, key removed from ignition switch.


• Within 5 seconds:


• Insert and remove the key from the ignition switch twice.


• Within 40 seconds:


• Close and open driver's door twice.


• Insert and remove the key from the ignitino switch.


• Close and open driver's door twice.


• Insert the key into the ignition switch and close the driver's door.


• Within 40 seconds:


• Switch igition ON and OFF once to program a remote transmitter code whilst retaining the original cods or twice to program a remote transmitter code whilst erasing the original codes. Three times to check how many remote transmitters are currently registered or five times to erase all registered codes.


• Remove key from ignition switch:


• System should now lock and unlock vehicle once, twice or five times depending on which mode has been selected. One to four times, slowly, to indicate number of remote transmitters registered.


• Within 40 seconds:


• Press and hold LOCK and UNLOCK buttons simultaneously for 1.5 seconds.


• Within 3 seconds:


• Press LOCK button.


• System should nw lock and unlock vehicle once to confirm registration, twice to indicate registration has failed.


• Within 40 seconds:


• Repeat button procedure to program remaining remote transmitters.

Fortunately this actually only took about 15 minutes and no Hokey Poky.